Shielded heating cable RIM 40 W / m
- Invoice payment,
- Credit card,
- In detail
- Customer pickup,
- Transport company
- In detail
THE FIRST METER OF ANY LINE REMAINS COLD!
ATTENTION: when using thermal insulation, pay attention to its temperature limits!
Calculation of heating cable length - Download formula
The Siberian manufacturing company "RIM" specializes in the production of heating systems, in particular, heating cables of various capacities. On the basis of such a cable, it is possible to design warm floors for premises of different areas and configurations due to the fact that the bending radius is very small (about 1 mm). Heating cable "RIM" with a capacity of 40 W / m is a good solution for heating iron pipes, doors, roofs and gutters, ground in greenhouses. The cable system is able to protect against freezing and icing, since it can be used even outdoors at subzero temperatures. In addition, this heating wire is highly efficient in the refrigeration industry.
The heating elements of the cable are made of constantan (an alloy based on copper, nickel and manganese) and are placed in a technological German silicone sheath, which allows the equipment to be used in destructive environments (for example, acids, oils).
Heating of iron pipes, heating of doors, roofs and gutters. Refrigeration industry.
High - temperature heating cable RIM can be used for refrigeration equipment (defrosting, defrosting, condensate drainage), to provide comfortable heating in residential premises. With the help of cables, an electric heating system is installed - warm floors. For roof de - icing and gutter heating systems; for protection from snow, icing and freezing in open areas; to protect metal pipes from freezing and heating doors, to heat the ground in greenhouses and hotbeds, in the refrigeration industry. The cable has a bending radius of 1mm, thanks to which it can heat even the most complex geometric structures. The maximum temperature for heating the cable in the open air is 95 degrees Celsius.
The bending radius of the cable is 1mm, it can be used to heat the most complex geometric structures. Heating cable RIM 40w has silicone insulation and does not break in cold weather, it can be operated at temperatures from - 60 to + 200 degrees Celsius, and for a short time it can withstand up to + 300 degrees. The silicone sheath allows the cable to be used in destructive environments: in frost, heat, water, oils, acids.
Heating cable RIM 40w has energy consumption 40% lower than that of analogues, due to the use of CONSTANTAN as a heating element. Constantan is a heat - stable alloy based on copper (about 59% ) with the addition of nickel (39 - 41% ) and manganese 1 - 2% (Mn). The alloy has a high specific electrical resistance (about 0.5 μOhm x m), a minimum value of the temperature coefficient of electrical resistance, a high thermoelectromotive force in combination with copper, iron and chromel.A type: resistive Heating element: constantan wire Specific power: 40W / m Maximum heating temperature in air: 95 ° C Maximum heating temperature in insulation (without cooling): 135 ° C The size: 5x8mm Maximum cable chain: 75m Rated voltage: 230V Grounding: there is Degree of protection: IPX7 Operating environment temperature: from - 60 to + 280 ° С Additional Information: shielded, cut off and sold in any length multiple of a meter Shelf life: is not limited Lifetime: 50 years