Heating cable RIM 60 W / m
- Invoice payment,
- Credit card,
- In detail
- Customer pickup,
- Transport company
- In detail
ATTENTION! This 60W cable model is NOT designed to maintain constant temperatures above 150 ° C! Under these operating conditions, the manufacturer is not responsible for the service life of the product!
THE FIRST METER OF ANY LINE REMAINS COLD!
ATTENTION: when using thermal insulation, pay attention to its temperature limits!
Calculation of heating cable length - Download formula
Heating cable manufactured by the Siberian plant "RIM" - modern technological equipment for heating plastic and iron pipes, soil in greenhouses, doors and roofs, as well as for the design of warm floors.
In the "heart" of such a cable are constantan heating elements placed in an insulating silicone sheath. Such a sheath allows the heating cable to be used in frost and heat, in aggressive environments (for example, in acid or oil).
Due to the small radius bending wires (about 1 mm), on the basis of the heating cable can be installed floor heating to heat the room even complex geometric configuration.
Heating cable "RIM" with a power of 60 W / m is produced in coils of 50 - 100 m, from which you can cut off the required footage and carry out simple installation. A 60 W / m heating cable is a good solution for heating concrete structures and for use in the refrigeration industry.
You can buy heating cables "RIM" of different power and length on the website of the company rim. ru. The price per running meter is indicated in the catalog next to the cable modification.
Heating of concrete. Refrigeration industry.
High - temperature heating cable RIM can be used for refrigeration equipment (defrosting, defrosting, condensate drainage), to provide comfortable heating in residential premises. With the help of cables, an electric heating system is installed - warm floors. For concrete heating systems; for protection from snow, icing and freezing in open areas; to protect metal pipes from freezing in difficult conditions, in the refrigeration industry. The cable has a bending radius of 1mm, thanks to which it can heat even the most complex geometric structures. The maximum temperature of heating the cable in the open air is 115 degrees Celsius.
The bending radius of the cable is 1mm, it can be used to heat the most complex geometric structures. Heating cable RIM 60w has silicone insulation and does not break in cold weather, it can be operated at temperatures from - 60 to + 200 degrees Celsius, and for a short time it can withstand up to + 300 degrees. The silicone sheath allows the cable to be used in destructive environments: in frost, heat, water, oils, acids.
Heating cable RIM 60w has energy consumption 40% lower than that of analogs, due to the use of CONSTANTAN as a heating element. Constantan is a heat - stable alloy based on copper (about 59% ) with the addition of nickel (39 - 41% ) and manganese 1 - 2% (Mn). The alloy has a high specific electrical resistance (about 0.5 μOhm x m), a minimum value of the temperature coefficient of electrical resistance, a high thermoelectromotive force in combination with copper, iron and chromel.A type: resistive Heating element: constantan wire Application:
- For heating stairs / steps
- For heating concrete
- Specialist. appointment